LevelOne GSW-2600TXM - Manual (Page 81)

81
2.6.3.Displaying Bridge Information
The Bridge menu is used to display settings for the Spanning Tree Algorithm. For a
more detailed description of how to use this algorithm, refer to “Spanning Tree
Algorithm” on chapter 4.
Bridge Menu
===========
Spanning Tree Bridge Information ...
Spanning Tree Port Information ...
<OK>
Display the spanning tree information.
Use <TAB> or arrow keys to move. <Enter> to select.
Menu Description
Spanning Tree
Bridge Information
Displays a full list of STA values used for the bridge.
Spanning Tree Port
Information Displays a list of STA values used for each port, including status,
designated cost, designated bridge, and designated port.
2.6.3.1.Viewing the Current Spanning Tree Information
The STA Bridge Information screen displays a summary of STA information for the
overall bridge. To make any changes to these parameters, use the Bridge STA
Configuration menu as described on chapter 2 “Configuring Global Bridge Settings”.
The parameters shown in the following figure and table describe the current Bridge STA
settings.