LevelOne GSW-2600TXM - Manual (Page 161)

161
3.7.6.1.Displaying Subnet Information
You can display a list of all the IP interfaces configured on this switch. This table
includes the gateway address, corresponding VLAN, and member ports that use this
address.
Parameter Description
IP Address The address for an IP interface on this switch.
Subnet Mask A template that identifies the address bits in the host address used for
routing to specific subnets. Each bit that corresponds to a “1” is part of
the network / subnet number; each bit that corresponds to “0” is part of
the host number.
VLAN The VLAN group associated with this IP interface.
Port Members The ports that can be reached through this IP interface.
3.7.6.2.ARP Table
Address Resolution Protocol (ARP) defines a method for extracting a host’s Ethernet
address from its Internet address. This table shows the IP-to-MAC address cache
discovered via ARP.
Parameter Description
IP Address IP addresses for which ARP has resolved the physical address
through a broadcast message.
Menu Description
Subnet Information Displays all the IP subnets configured on this switch, as well as the
corresponding VLANs and ports.
ARP Table Shows the IP-to-MAC addresses discovered by ARP.
Routing Table Shows the routes through which all recognized Ethernet networks
(and the corresponding VLAN) can be reached.
Multicast Table Displays all the multicast groups active on this switch, including the
multicast IP address and the corresponding VLANs. Also includes
the IGMP registration table, the multicast forwarding cache, and
DVMRP routing information.
OSPF Table Displays a link state advertisement summary, the neighbor table,
and the virtual neighbor table.