LevelOne GSW-2600TXM - Manual (Page 38)

38
Address The MAC address of a host device attached to this switch.
Port The switch port to which the host device is attached.
Note:
To assign a MAC address to a specific port, use <Add>. To delete or modify an
address, highlight it with the cursor and select Enter.
To scroll through the address table, use the <Next Page> and <Prev Page>
buttons. To display a specific page, set the page number in the Page field and
then select <Apply>.
2.5.2.5.Configuring the Static Multicast Address Table
The Static Multicast Address Table can be used to assign a destination MAC address
(and the corresponding ports) to the VLAN group used for a specific multicast service.
Static multicast addresses are never aged out, and traffic with these addresses can be
forwarded only to ports specified in this table.
Layer 2 Menu: Multicast Address Table
============
Port 1 2
VLAN Address 12345678901234567890123456
2 01-80-AD-84-0A-A0 MMMMMMM
Page 1 <Apply> Total 1 Pages
<OK> <Next Page> <Prev Page> <Add>
Return to previous panel.
Use <TAB> or arrow keys to move. <Enter> to select.
Parameter Description
VLAN
The VLAN corresponding to this multicast service.
Address The destination MAC address for a multicast service.
Port The ports to which this multicast traffic can be forwarded.
Note:
To assign a destination MAC address to one or more ports, use <Add>. To delete
or modify an address, highlight it with the cursor and select Enter.
To scroll through the address table, use the <Next Page> and <Prev Page>
buttons. To display a specific page, set the page number in the Page field and
then select <Apply>.