LevelOne GSW-2600TXM - Manual (Page 32)

32
Layer 2 Menu: Port Configuration (Port 1-12)
============
Port Link Admin Auto Default Current Flow
Jack
Status Status Negotiate Type Type
Control Type
-----------------------------------------------------------------
----------
1 Off ENABLED ENABLED 10HDX 10HDX Off
RJ-45
2 Off ENABLED ENABLED 10HDX 10HDX Off
RJ-45
3 Off ENABLED ENABLED 10HDX 10HDX Off
RJ-45
4 Off ENABLED ENABLED 10HDX 10HDX Off
RJ-45
5 Off ENABLED ENABLED 10HDX 10HDX Off
RJ-45
6 Off ENABLED ENABLED 10HDX 10HDX Off
RJ-45
7 Off ENABLED ENABLED 10HDX 10HDX Off
RJ-45
8 Off ENABLED ENABLED 10HDX 10HDX Off
RJ-45
9 On ENABLED ENABLED 10HDX 100TX-FDX Off
RJ-45
10 Off ENABLED ENABLED 10HDX 10HDX Off
RJ-45
11 Off ENABLED ENABLED 10HDX 10HDX Off
RJ-45
12 On ENABLED DISABLED 100FDX 100FX-FDX Off
FIBER
<Apply> <OK> <Cancel> <Prev Page> <Next
Page>
Administrative status for port 1. |
READ/SELECT
Use <TAB> or arrow keys to move, <Space> to scroll options.
Parameter Default
Description
Link Status Indicates if the port has a valid connection to an external
device.
Admin Status Enabled Allows you to disable a port due to abnormal behavior (e.g.,
excessive collisions), and then enable it after the problem has
been resolved. You may also disable a port for security
reasons.
Auto Negotiate Enabled
(except
100FX)
Enables or disables auto-negotiation for the following features
Port Type Speed Duplex Mode Flow Control
10/100BASE-T auto auto auto
100BASE-FX 100M- full duplex auto
1000BASE-SX/
LX
1000M full duplex auto
1000BASE-T 1000M full duplex auto
The 10/100BASE-TX ports can auto negotiate the speed to
10/100 Mbps, and the transmission mode to half / full duplex.