LevelOne GSW-2600TXM - Manual (Page 109)

109
of the page to confirm the new setting. The following table summarizes the Web page
configuration buttons.
Web Page Configuration Buttons
Button Action
Apply
Sets specified values in the SNMP agent.
Cancel Cancels specified values prior to pressing the “Apply” button.
Refresh Immediately updates values from the SNMP agent.
Notes:
1. To ensure proper screen refresh, be sure that Internet Explorer 5.x is configured as
follows: Under the menu “Tools / Internet Options / General / Temporary Internet
Files / Settings,” the setting for item “Check for newer versions of stored pages”
should be “Every visit to the page.”
2. When using Internet Explorer 5.0, you may have to manually refresh the screen after
making configuration changes by pressing the browser’s refresh button.
3.2.3.Panel Display
The Web agent displays an image of the switch’s ports, showing port links and activity.
Clicking on the image of a port displays statistics and configuration information for the
port. Clicking on the image of the serial port (labeled “Mgmt”) displays the Console
Configuration screen. Clicking on any other part of the front panel displays switch
version information as described on chapter 3 “Displaying Switch Version Information”.
3.2.4.Port State Display
Click on any port to display a summary or port status as shown below, as well as
Etherlike statistics (chapter 3 “Displaying Ethernet Port Statistics”).