Displaying rmon statistics – LevelOne GSW-2600TXM User Manual

Page 78

Advertising
background image

78

Jabbers

The total number of frames received that were longer than 1518
octets (excluding framing bits, but including FCS octets), and had
either an FCS or alignment error.

Note:

Statistics are refreshed every 10 seconds by default (chapter 2 “Configuring the
Serial Port”).

2.6.1.2.Displaying RMON Statistics

Use the RMON Statistics screen to display key statistics for each port from RMON
group 1. (RMON groups 2, 3 and 9 can only be accessed using SNMP management
software.) The following screen displays the overall statistics on traffic passing through
each port. RMON statistics provide access to a broad range of statistics, including a
total count of different frame types and sizes passing through each port. Values
displayed have been accumulated since the last system reboot.

RMON Statistics
===============

Drop Events : 0

Jabbers : 0
Bytes : 0

Collisions : 0
Frames : 0 64 Byte

Frames : 0

Broadcast Frames : 0 65-127 Byte
Frames : 0

Multicast Frames : 0 128-255 Byte

Frames : 0
CRC/Alignments Errors : 0 256-511 Byte

Frames : 0
Undersize Frames : 0 512-1023 Byte

Frames : 0
Oversize Frames : 0 1024-1518 Byte
Frames : 0

Fragments : 0 1519-1536 Byte
Frames : 0



Port Number: 1 <Apply> <Reset>

<Reset All>

<OK> <Refresh> <Next Port>

<Prev Port>
Return to previous panel.
Use <TAB> or arrow keys to move. <Enter> to select.

Advertising