LevelOne GSW-2600TXM - Manual (Page 128)

128
Bridge
Configuration Contains global bridge settings for STA (including bridge priority, hello
time, forward delay, maximum message age), GMRP, GVRP, traffic
class priority threshold, and address aging time.
STA Port
Configuration Contains STA settings for individual ports, including port priority, path
cost, and fast forwarding
3.6.3.1.Configuring Global Bridge Settings
The following figure and table describe bridge configuration for STA, GMRP, GVRP,
priority threshold, and address aging time.
Parameter Default Description
Spanning
Tree
Enabled Enable this parameter to participate in a STA compliant
network.
Bridge
Priority 32,768 Bridge priority is used in selecting the root device, root port, and
designated port. The device with the highest priority becomes
the STA root device. However, if all devices have the same
priority, the device with the lowest MAC address will then
become the root device.
Enter a value from 0 - 65535.
Remember that the lower the numeric value, the higher the
priority.
Hello Time 2 Time interval (in seconds) at which the root device transmits a
configuration message.
The minimum value is 1.
The maximum value is the lower of 10 or [(Max. Message Age /
2) -1].