Paradise 205486 REV F - Manual (Page 140)

140 208495 REV C Operations Manual, HPA2, Compact Outdoor SSPA
Alternate Redundant System Configurations
Mixing Compact Outdoor SSPA with other manufacturer Amplifier
Configuring redundant systems with other manufacturers amplifiers can be achieved by using
an external controller such as the Teledyne Paradise Datacom RCP2-1100. The external
controller is required because the internal controller in the Compact Outdoor Amplifier is
specifically designed to operate with other Compact Outdoor SSPAs.
The RCP2-1100 controller will control the 1:1 redundant system provided that the other man-
ufacturer’s amplifier is equipped with a form A or form C summary alarm relay contact. Such
a configuration is shown in the schematic below. The RCP2-1100 is a 1RU remote
controller capable of driving a waveguide switch that is located several hundred feet from the
controller.
Figure B-2: Redundant System using RCP2-1100 Controller
&
CONTROL
MONITOR
A
B
C
1
2
4
3
RF Output
Transfer Switch
CONTROL CABLE
C N.C. N.O.
RCP2-1100
J8 J3
4
1
2
External Alarm
Cable RF Input
F
D
Pos 1
Pos 2
U
W
P
S
&
CONTROL
MONITOR
Open on Fault Closed on Fault
SSPA 2
SSPA 1
Closed on Fault Open on Fault
a b L
Aternate SSPA
Compact Outdoor SSPA