Paradise 205486 REV F - Manual (Page 81)

Operations Manual, HPA2, Compact Outdoor SSPA 208495 REV C 81
From the Control Panel display all typical 1:1 system functions can be monitored and
controlled. A particular SSPA can be put on line be selecting the command button for either
amplifier. The online amplifier will be indicated by the “Online” notation. The standby amplifier
will be listed as such as shown in Figure 8-13 (Unit 2).
A particular redundant configuration can be saved by going to the “File” menu and selecting
“Save Configuration”. Thus if the program is terminated and then restarted, it will immediately
boot up with the Redundancy Control Panel display.
Each individual amplifier’s characteristics can still be monitored and controlled from its
respective “Operation” window. If the user attempts to Mute an on-line amplifier, a warning
window will pop-up asking if this is a valid request. See Figure 8-14.
Figure 8-13: Universal M&C, showing a configured 1:1 Redundant System
Figure 8-14: Dialog window, Affirm mute of on-line amplifier