Paradise 205486 REV F - Manual (Page 37)

Operations Manual, HPA2, Compact Outdoor SSPA 208495 REV C 37
3.4 Universal M&C Operation
1. Run the Teledyne Paradise Datacom Universal Monitor and Control Program from the
Programs Menu of your PC.
2. Select [Action] → [Add Unit] from the main menu of the Universal M&C Program and
select [Compact Outdoor SSPA] from the menu choices. See Figure 3-9.
3. A new dialog window will open (see Figure 3-10). Enter the following information
where applicable: Unit ID; if using a RS-232 Connection, the Serial Port and Baud
Rate; or if using an Ethernet Connection, the unit’s IP Address.
4. Specify the unit’s Address in the Amplifier Address box. If you don’t know the address
of the unit you may search for it. Be aware that this search feature is only useful when
you have only one unit connected to your PC at a time.
5. If you wish to change the log file location, click on the [Browse] button and navigate to
the desired location. See Section 3.4.4 for more information about the log file.
6. Click on the [Create] button to generate the operation window for this unit.
Figure 3-9: Universal M&C Add Unit menu
Figure 3-10: Add Compact Outdoor SSPA window, via Serial (left) or Internet (right)
Serial connection ► ◄ Internet connection
Default IP address
is 192.168.0.1.