Paradise 205486 REV F - Manual (Page 48)

48 208495 REV C Operations Manual, HPA2, Compact Outdoor SSPA
•
General Settings Window: Displays the SSPA Redundancy and BUC/Amplifier
Settings. See Figure 3-23 for descriptions of the contents of the General Settings
window.
•
Adjust Redundancy settings;
•
Mute/Unmute amplifier;
•
Adjust Attenuation;
•
Change Network Address;
Note: The Compact Outdoor SSPA initially starts up in the Muted state;
Change the Mute Setting in the General Settings tab to enable Transmit
RF.
Figure 3-23: General Settings window descriptions
Select Mute State:
Muted or Unmuted.
Select BUC Source
Reference: Internal,
External, Auto.
Select Gain Control:
Serial Port,
Select Network
Address; Click
‘Confirm’ to Change.
Select Attenuation;
Click ‘Confirm’ to
change.
Select Single
or Redundant Mode.
Select HPA1, HPA2
or HPA3.
Select Startup State:
Online or Standby.
Select Standby
Mode: Hot or Cold
Standby.