Paradise 205486 REV F - Manual (Page 23)

Operations Manual, HPA2, Compact Outdoor SSPA 208495 REV C 23
2.5 Compact Outdoor Mounting Kit Installation
These instructions outline how to install a Teledyne Paradise Datacom Compact Outdoor
SSPA unit onto an antenna boom, using a Universal Compact Outdoor Mounting Kit. This kit
allows installation of the Compact Outdoor SSPA on antenna booms up to 10” thick.
2.5.1 Safety Considerations
These instructions are designed to be used by a single operator. As such, several safety
issues should be kept in mind during the installation.
1. The Teledyne Paradise Datacom Compact Outdoor SSPA unit weighs approximately
36 lbs., and should be handled with care to avoid scratching the exterior coating and
compromising the unit’s corrosion resistance.
2. All bolts should be tightened to within reasonable limits to avoid stripping the threads.
3. The section of antenna boom the unit is to be mounted on should be straight, dry, and
free from corrosion or defects.
2.5.2 Inspection
On receiving the Universal Compact Outdoor Mounting Kit, inspect the contents to ensure all
parts listed in Table 2-8 are present.
Item # Qty Description Part No.
1 4 Bracket, Mounting L201394-1
2 4 Uni-Strut, 13.5” Lengths L201393-1
3* 4 1/2”-13 All Thread Stud, SS 188FTS 8-11 or -15
4 4 1/2” Lock Washer 50LW188
5 16 Nut, Hex, 1/2”-13 1/2-13 Nut
6 16 Washer, Flat, Std. 1/2” MS15795-819
7 4 Bolt, Hex, 1/2”-13 x 1.25, SS MS35307-411
* Kits are supplied with two different All Thread lengths (11.0” or 15.0”) depending on the
installation. The 11-inch All Thread allows mounting on booms up to 6” diameter. The 15-inch
All Thread allows mounting on booms up to 10” diameter.
Table 2-8: Mounting Kit Parts List