Adjusting the video, Adjusting audio and video, Adjusting audio and video 05 – Pioneer SX-LX03 User Manual
Page 105: Chapter 5
Adjusting audio and video
05
105
En
Chapter 5
Adjusting audio and video
Important
• Set the remote control operation selector
switch to
BD to operate the Blu-ray disc
player.
Adjusting the video
The quality of the playback picture can be
adjusted according to the TV you are using.
1
Display the TOOLS menu.
During playback, press
TOOLS.
2
Select and set the item.
Use
/ to select Video Adjust, then press
ENTER.
3
Select a preset.
Select using
/ according to the TV being
used.
•
LCD – Select this when connected to a
liquid crystal display TV.
•
PDP – Select this when connected to a
plasma TV of another brand.
•
Pioneer PDP – Select this when connected
to a Pioneer plasma TV.
•
Projector – Select this when connected to
a front projector.
•
Professional – With this setting, video
signal processing is restrained. Select this
when connected to a professional monitor.
•
Memory1 to 3 – Picture quality settings
with adjusted parameters can be stored in
the memory. For a description of the
parameters, see When Memory1, 2 or 3 is
selected below.
When Memory1, 2 or 3 is selected
1
Select Adjustments.
Use
to select Adjustments, then press
ENTER.
A detailed settings screen appears.
2
Select the item to be adjusted.
Use
/ to select.
RECEIVER
iPod
BD
SETUP
TOOLS
ENTER
ENTER
Adjustments
Video Adjust
PDP
ENTER
Prog. Motion
Pure Cinema
YNR
CNR
BNR
MNR
Video Adjust [ Memory1 ]
Use [ ][ ] to adjust the picture to progressive scan.
Motion
Still
Auto1
Off
Max
Off
Max
Off
Max
Off
Max
1/2 Page
LX03BD_2.book Page 105 Monday, July 28, 2008 4:30 PM