Advanced settings 06 – Pioneer SX-LX03 User Manual

Page 115

Advertising
background image

Advanced settings

06

115

En

SL/SR (left and right surround speakers):
Yes/No

SBL/SBR (left and right surround back
speakers):

Yes/No

Closing the speaker settings screen

Press ENTER.

Adjusting the output level of the
various speakers (Channel Level)

Adjust each output level of the different
speakers by using test tones. This setting is
only valid for analog audio outputs.

1

Select and set Speakers.

Use

/ to select, then press ENTER.

2

Select and set Channel Level, then

Fix or Variable.
Use

/ to select, then press ENTER.

Fix – The output level of all the speakers is
set to the maximum.

Variable – The output level of all the
speakers is set 6.0 dB lower than when

Fix

is selected. From this point, the output
levels of the

L, C, R, SL, SR, SBL, SBR and

SW speakers can be adjusted within the
range of –6.0 dB to +6.0 dB.

• If you have selected

Variable, proceed to

step 3.

Caution

• This cannot be selected when

Audio

Output Mode is set to 2 Channel. Change
the setting to

Multi-channel (page 110).

3

Select and set the method for

switching the speaker to be adjusted.
Use

/ to select, then press ENTER.

Auto – Switch the speaker to be adjusted
automatically.

Manual – Switch the speaker to be
adjusted manually.

Caution

• Test tones are output. Lower the volume of

the device connected to the player.

4

Adjust the output level.

Use

/ to select, / to adjust.

ENTER

Audio Output Mode

Speaker Setup

Channel Level

Multi-channel

Fix

Video Out

Audio Out

Speakers

HDMI

Language

Parental Lock

Options

Setup Navigator

Initial Setup

BD PLAYER

ENTER

ENTER

Test Tone Switching

Select whether test tone output is

switched automatically or manually.

Video Out

Audio Out

Speakers

HDMI

Language

Parental Lock

Options

Setup Navigator

Speaker Setup

BD PLAYER

Auto

Manual

ENTER

L
C
R
SR
SBR
SBL
SL
SW

0.0 dB
0.0 dB
0.0 dB
0.0 dB
0.0 dB
0.0 dB
0.0 dB
0.0 dB

Channel Level

BD PLAYER

Use [ ][ ] to select a speaker, then press [ ][ ]

to adjust the channel level and then press ENTER.

LX03BD_2.book Page 115 Monday, July 28, 2008 4:30 PM

Advertising
This manual is related to the following products: