Pioneer SX-LX03 - Manual (Page 122)

Advanced settings 06
122
En
Caution
• Linear PCM audio signals (2 channels) are output from all terminals other than the ones
selected at Audio under Output Terminal Priority, regardless of the audio format or the
player’s settings (pages 83 and 119).
• The audio signals output from the DIGITAL OUT terminals have a sampling frequency of 48
kHz (44.1 kHz for CDs).
• MPEG audio is output in linear PCM.
• When connected to this receiver using the HDMI jacks, the audio signals are converted as
below for output from this player.
– Dolby TrueHD signals are decoded by this player and output as 5.1-channel (or fewer) linear
PCM signals.
– Dolby Digital Plus signals are output as a Dolby Digital bitstream.
– DTS-HD Master Audio or DTS-HD High Resolution Audio signals are output as a DTS Digital
Surround bitstream.
– MPEG-2 AAC signals are decoded by this player and output as 2-channel linear PCM
signals.
– 7.1-channel linear PCM signals are downmixed to 5.1 channels for output.
8. If the connected HDMI device is not compatible with Dolby TrueHD or Dolby Digital Plus bitstream, the signals are
output in Dolby Digital bitstream.
If the connected HDMI device is not compatible with DTS-HD Master Audio or DTS-HD High Resolution Audio, the
signals are output in DTS Digital Surround bitstream.
If the connected HDMI device is not compatible with Dolby Digital or DTS Digital Surround bitstream, the signals
are output in linear PCM.
9. Only compatible with 7.1-channel surround back. 6.1-channel surround back is output in 7.1 channels. In other cas-
es, output as audio signals of 5.1-channels or less.
10. When the output video resolution is set to 576i/480i or 576p/480p, the signals may be output in 2 channel, depending
on HDMI High-Speed Transmission setting and/or the connected HDMI device (page 77).
11. When the output video resolution is set to 576i/480i or 576p/480p, the signals may be output in Dolby Digital bit-
stream, depending on HDMI High-Speed Transmission setting and/or the connected HDMI device (page 77).
12. DTS Digital Surround signals converted to linear PCM audio signals are output.
13. When the output video resolution is set to 576i/480i or 576p/480p, the signals may be output in DTS Digital Surround
bitstream, depending on HDMI High-Speed Transmission setting and/or the connected HDMI device (page 77).
LX03BD_2.book Page 122 Monday, July 28, 2008 4:30 PM