Pioneer SX-LX03 - Manual (Page 17)

Speaker Setup Guide (LX03BD) 02
17
En
English
Français
Deutsch
Nederlands
Italiano
Español
Preparing the speakers
1 Attach the non-skid pads to the base of
each speaker (as shown).
Use the adhesive side of the pads to attach
them to the base (flat surface) of each speaker.
2 (When mounting center speakers to right
and left) Stack the speakers and fix with the
bracket.
Each speaker is provided with a color-coded
indicator on the label on the rear side to assist
identification. Refer to the color indicators and
install the speakers correctly.
As shown in the illustration, stack the
speakers. Align the brackets with the screw
holes on the back of the two speakers, and use
the two screws to fix in place.
Standard surround setup:
Front
speaker
Center
speaker
Surround
speaker
Non-skid pads
(for satellite
speakers)
Subwoofer
Non-skid pads
(for subwoofer)
Color indicator
Front
speaker
Screw
Bracket
Center
speaker
Front
speaker
Center
speaker
Left
Green Green
White Red
Right
LX03BD_1.book Page 17 Monday, July 28, 2008 2:12 PM