Pioneer SX-LX03 - Manual (Page 109)

Advanced settings 06
109
En
DVD 16:9 Video Out Letter Box 16:9 pictures are displayed with black bands at the top and
bottom when watching on a 4:3 screen.
Pan & Scan The picture is displayed over the entire screen, with the left
and right sides of the 16:9 picture cut off. Select this to watch
4:3 pictures over the entire screen.
NTSC on PAL TV On Select this when connected to the PAL-only TV. When playing
the materials with the frame/field rate other than 50 Hz, the
PAL-only TV can display correctly.
Off Select this when multi-system (NTSC-compatible) TV.
Many recent PAL TVs support the input of NTSC signals. Therefore, this can be set to Off. Check also the
operating instructions of your TV.
Still Picture Field This eliminates instability of the picture when playback is
paused.
Frame This makes pictures clear when playback is paused, but
instability may be observed.
Auto Field or Frame is selected automatically according to the
disc or file being played.
Audio Out
Dolby Digital Out
* Only valid for digital
audio outputs.
Dolby Digital 1 Dolby Digital audio signals are output. With BD-ROMs, the
secondary audio and interactive audio are mixed for output.
Dolby Digital 2 Dolby Digital audio signals are output. With BD-ROMs, the
signals are output without mixing the secondary audio and
interactive audio signals.
Dolby Digital 
PCM
Select this when the connected AV receiver or amplifier, etc.,
is not compatible with Dolby Digital audio signals. The Dolby
Digital audio signals are converted into linear PCM audio
signals for output.
DTS Out
* Only valid for digital
audio outputs.
DTS 1 DTS Digital Surround audio signals are output. With BD-
ROMs, the secondary audio and interactive audio are mixed
for output.
DTS 2 DTS Digital Surround audio signals are output. With BD-
ROMs, the signals are output without mixing the secondary
audio and interactive audio signals.
DTS  PCM Select this when the connected AV receiver or amplifier, etc.,
is not compatible with DTS Digital Surround audio signals.
The DTS Digital Surround audio signals are converted into
linear PCM audio signals for output.
Setting Options Explanation
LX03BD_2.book Page 109 Monday, July 28, 2008 4:30 PM