Pioneer SX-LX03 - Manual (Page 15)

Controls and displays 01
15
En
English
Français
Deutsch
Nederlands
Italiano
Español
4 Character display
Displays the title/chapter/track number,
elapsed time, etc.
5 24HZ/50HZ/60HZ
The frequency of the video frame or field being
output lights.
6 CONTROL
Lights when the HDMI Control function is
activated (page 78).
Rear Panel
1 AUDIO OUT (2 ch) terminals
Connect with the audio input terminals on a TV
or tape recorder, etc.
2 AUDIO OUT (7.1 ch) terminals
Connect with the 7.1 channel audio input
terminals on an AV receiver or amplifier, etc.
3 VIDEO OUT terminals
VIDEO – Connect with the video input
terminal on a TV.
S-VIDEO – Connect with the S-Video input
terminal on a TV.
COMPONENT VIDEO – Connect with the
component video input terminals on a TV.
4 AC IN
Connect the power cord here.
5 HDMI OUT terminal
Connect to the HDMI IN 1 jack of the receiver
with the supplied HDMI cable.
6 DIGITAL OUT (OPTICAL)
Connect with the digital audio input terminal
on the other audio component.
7 CONTROL IN terminal
Use to control this player from the remote
sensor of another Pioneer component with a
CONTROL OUT terminal and bearing the

mark. Connect the CONTROL OUT of the other
component to the CONTROL IN of this player
using a mini-plug cord.
Caution
• Be sure to connect cables for outputting the
audio and video signals (pages 76 and 80).
• When connected via System Control, point
the remote control toward the connected
component. The remote will not work
correctly when pointed at this player.
• You cannot use System Control with
components that do not have a System
Control terminal or with components
manufactured by companies other than
Pioneer.
R
R
AUDIO OUT ( 2 ch ) AUDIO OUT ( 7.1 ch )
VIDEO OUT
HDMI OUT
DIGITAL
OUT
CONTROL
IN
L
L
Y
P B
P R
FRONT
OPTICAL COMPONENT
VIDEO
SURROUND CENTER
VIDEO
S-VIDEO
SUB WOOFER
SURROUND BACK
AC IN
2 1 3 4
6 5 7
LX03BD_1.book Page 15 Monday, July 28, 2008 2:12 PM