Pioneer SX-LX03 - Manual (Page 25)

Speaker Setup Guide (SX-LX08) 02
25
En
English
Français
Deutsch
Nederlands
Italiano
Español
Connect the subwoofer.
• Use the RCA plug cable furnished with the
speaker system (or commercial alternative)
to connect the
SUBWOOFER PREOUT
connector to the line level input connector
of the powered subwoofer.
Caution
• These speaker terminals carry
HAZARDOUS LIVE voltage. To prevent
the risk of electric shock when connecting
or disconnecting the speaker cables,
disconnect the power cord before touching
any uninsulated parts.
• Do not connect any speakers other than
those designated for this system.
• After connecting the plugs, pull lightly on
the cables to make sure that the ends of
the cables are securely connected to the
terminals. Poor connections can create
noise and interruptions on the sound.
• If the cable’s wires happen to be pushed
out of the terminals, allowing the wires to
come into contact with each other, it
places an excessive additional load on the
amp. This may cause the amp to stop
functioning, and may even damage the
amp.
LX03BD_1.book Page 25 Monday, July 28, 2008 2:12 PM