Additional information 11 – Pioneer SX-LX03 User Manual
Page 63
Additional information
11
63
En
English
Français
Deutsch
Nederlands
Italiano
Español
Error MIC!
An error occurred during MCACC setup because the microphone is not connected
or is not connected properly.
Error Speaker!
An error occurred during MCACC setup because the speakers are not connected or
are not connected properly.
Error SW!
(SX-LX08 model only)
When performing
MCACC setup, no sound could be detected from subwoofer.
Confirm that the subwoofer's power switch is set to ON, and raise subwoofer sound
volume to comfortable level, then press
ENTER once again.
Exit
Appears when a menu is automatically exited after a set period of inactivity.
HDMI Audio <TV>
Displays when you change the listening mode, the volume level, or some sound
settings when the HDMI Audio is set to
TV.
HDMI C.ERR 1**
Check if the HDMI cable is properly connected. If the cable is properly connected,
this unit may be damaged. In such an event, please contact a Pioneer-authorized
service center or your nearest dealer.
HDCP ERROR
Check whether or not the connected component is compatible with HDCP. Some
components that are compatible with HDCP still cause this message to be
displayed, but so long as there is no problem with displaying video, this is not a
malfunction.
Key Lock
The key lock is enabled. See Key lock setting on page 57.
Line Out Mode
Operation is disabled since Line Output is set to
Lt/Rt.
Muting
When audio is muted, display appears if Auto MCACC setup is performed.
No MIC
Display appears when Auto MCACC setup is performed without a microphone
connected.
Noisy!
Background noise is too high to complete MCACC setup successfully.
Not support
Try adjusting the resolution, DeepColor or other setting for your component.
OC Error1
OC Error2
Check whether the speaker cables are short-circuited. If the error message
continues to be displayed, contact your Pioneer authorized service center or your
dealer for servicing.
Over Temp
Try lowering the volume. If this problem is not fixed by removing and inserting the
power cable, this unit may be damaged. In such an event, please contact a Pioneer-
authorized service center or your nearest dealer.
Phones In
An operation is prohibited because the headphones are connected.
*** BackUpERR
Contact your Pioneer authorized service center or your dealer for servicing.
Message
Description
LX03BD_1.book Page 63 Monday, July 28, 2008 2:12 PM