Pioneer SX-LX03 - Manual (Page 77)

Player connections 02
77
En
English
Français
Deutsch
Nederlands
Italiano
Español
About HDMI
This player incorporates High-Definition
Multimedia Interface (HDMI™) technology.
The player supports Deep Color. The
conventional players can transmit a video
signal with 8 bit color depth in the YCbCr 4:4:4
or RGB formats, the players supporting Deep
Color can transmit a video signal with a color
bit depth of greater than 8 bits per color
component. Subtle color gradations can be
reproduced when connected to a TV that
supports Deep Color.
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.
Audio signals that can be transferred
with the player’s HDMI OUT terminal
• Dolby TrueHD
• Dolby Digital Plus
• Dolby Digital
• DTS-HD Master Audio
• DTS-HD High Resolution Audio
• DTS Digital Surround
• MPEG-2 AAC
• Linear PCM
Linear PCM audio signals meeting the
following conditions can be output:
– Sampling frequency: 32 kHz to 192 kHz
– Number of channels: Up to 8 (up to 6 for
a 192 kHz sampling frequency)
When outputting the bitstream of Dolby
TrueHD, Dolby Digital Plus, Dolby Digital, DTS-
HD Master Audio, DTS-HD High Resolution
Audio, DTS Digital Surround, MPEG or MPEG-
2 AAC, these audio signals output in linear
PCM from the HDMI terminal to this receiver.
For details, see About the audio output settings
on page 121.
About the HDMI high speed transmission
This player outputs 1080/50p, 1080/60p and
Deep Color video signals. If your TV supports
1080/50p, 1080/60p or Deep Color signals, use
a High Speed HDMI™ cable or the supplied
HDMI cable in order to take advantage of the
maximum performance the player and TV can
offer. Also set
HDMI High-Speed
Transmission to On (page 110).
High Speed HDMI™ cables are tested to carry
signals up to 1080p. 1080/50i, 1080/50p, 720/
50p, 1080/24p, 1080/60i, 1080/60p and 720/60p
video signals that are capable of Deep Color
can also be carried.
Note
• Set HDMI High-Speed Transmission to
Off when using an HDMI cable other than
a High Speed HDMI™ cable (a Standard
HDMI™ cable).
• The following restrictions apply when
HDMI High-Speed Transmission is set to
Off:
– Deep Color signals are not output.
– If output video resolution is set to Auto,
the signals are output with a resolution of
1080/50i or 1080/60i when TV’s preferred
resolution is 1080/50p or 1080/60p.
– When the output video resolution is set
to 576i/480i or 576p/480p, Dolby
TrueHD and DTS-HD Master Audio
signals are not output as such. They are
either output as Dolby Digital or DTS
Digital Surround signals or converted
into linear PCM. Also, 96 kHz and 192
kHz multi-channel linear PCM audio
signals cannot be output. They are
output as 2-channel signals (page 121).
• When an HDMI cable with a built-in
equalizer is connected, it may not operate
properly.
LX03BD_2.book Page 77 Monday, July 28, 2008 4:30 PM