Pioneer SX-LX03 - Manual (Page 52)

Other connections 09
52
En
Resetting the HDMI connection
If the screen goes blank (for example, after
changing the resolution), check the
troubleshooting guide on (page 62). If this
doesn’t solve the problem, follow the steps
below to reset the HDMI connection.
1 Press SETUP.
2 Select ‘Initialize’ then press ENTER.
3 Select ‘HDMI Init’ then press
ENTER.
• Initialize OK? is displayed.
4 Press ENTER to confirm initialization.
The system will restart and the HDMI settings
are automatically reset to the factory defaults.
About HDMI
HDMI (High-Definition Multimedia Interface)
supports both video and audio on a single
digital connection for use with DVD players,
DTV, set-top boxes, and other AV devices. HDMI
was developed to provide the technologies of
High-bandwidth Digital Content Protection
(HDCP) as well as Digital Visual Interface (DVI)
in one specification. HDCP is used to protect
digital content transmitted and received by DVI-
compliant displays.
HDMI has the capability to support standard,
enhanced, or high-definition video plus stan-
dard to multichannel surround-sound audio.
HDMI features include uncompressed digital
video, a bandwidth of up to 2.2 gigabytes per
second (with HDTV signals), one connector
(instead of several cables and connectors), and
communication between the AV source and
AV devices such as DTVs.
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.
SETUP
TOOLS
ENTER
ENTER
ENTER
LX03BD_1.book Page 52 Monday, July 28, 2008 2:12 PM