Powerware 6000 - Manual (Page 13)

5 Powerware ® 9 Prestige Series User’s Guide (4500/6000 VA)
S
Rev H www.powerware.com
C H A P T E R 2
S
AFETY
W
ARNINGS
I M P O R T A N T S A F E T Y I N S T R U C T I O N S
SAVE THESE INSTRUCTIONS. This manual contains important instructions that you
should follow during installation of the UPS. Please read all instructions before
operating the equipment and save this manual for future reference.
D A N G E R
This UPS contains LETHAL VOLTAGES. All repairs and service should be performed
by AUTHORIZED SERVICE PERSONNEL ONLY. There are NO USER
SERVICEABLE PARTS inside the UPS.
C A U T I O N
S
Batteries can present a risk of electrical shock or burn from high short circuit
current. Observe proper precautions.
S
Proper disposal of batteries is required. Refer to your local codes for disposal
requirements.
S
This UPS contains its own energy source (batteries). The output receptacles may
carry live voltage even when the UPS is not connected to an AC supply.
S
Never dispose of batteries in a fire. Batteries may explode when exposed to flame.
S
Never open or mutilate batteries. Released electrolyte is harmful to the skin and
eyes, and may be extremely toxic.
S
To reduce the risk of fire or electric shock, install this UPS in a temperature and
humidity controlled, indoor environment, free of conductive contaminants. Ambient
temperature must not exceed 104
°F (40°C). Do not operate near water or
excessive humidity (95% max).
S
Do not remove or unplug the input cord when the UPS is turned on. This removes
the safety ground from the UPS and the equipment connected to the UPS.
S
The wall outlet must be within 2 meters of the equipment and accessible to the
operator. The on/off switch on the UPS does not electrically isolate the internal
parts. Unplug the input cord from the wall outlet when disconnecting the unit for
long periods of time.