Powerware 6000 - Manual (Page 68)

Communication
60 Powerware ® 9 Prestige Series User’s Guide (4500/6000 VA)
S
Rev H www.powerware.com
Front Panel Communications Access
Before you access the front panel, review the following configurations
and note the indicator that corresponds with the communication mode.
NOTE Only the Printer mode front panel options change the baud rate. Use the UPS
Serial Communications Menu to select other baud rates (see page 62).
Unlit
Amber
Green
Flashing
Indicator Legend
OVERLOAD
SITE FAULT
OVERTEMP
BATTERY
SELF TEST
OVERLOAD
SITE FAULT
OVERTEMP
BATTERY
SELF TEST
OVERLOAD
SITE FAULT
OVERTEMP
BATTERY
SELF TEST
FR
ON
T
P
AN
E
L
C
O
M
M
U
N
IC
A
T
ION
OP
T
ION
S
Printer Mode, 2400 Baud, Novell Contacts
Select this mode for the OnliNet R or LanSafe
software.
OVERLOAD
SITE FAULT
OVERTEMP
BATTERY
SELF TEST
OVERLOAD
SITE FAULT
OVERTEMP
BATTERY
SELF TEST
Novell-Style LAN Contacts
Any baud rate other than 2400 or 19200
with Printer mode, or not Printer mode.
AS/400-Style LAN Contacts, No Serial
Select this mode for the OnliSafe R software.
3Com LAN Manager
Any communication mode and baud rate
option.
Printer Mode, 19200 Baud (network
devices), Novell Contacts
Figure 26. Front Panel Communication Options