Nortel Networks NN43001-314 - Manual (Page 17)

17
New in this release
This document is a global document. Contact your system supplier or your
Nortel representative to verify that the hardware and software described
are supported in your area.
This document describes the Branch Office feature and contains information
on planning, installation, configuration, and maintenance. Information
in this document complements information found in documents in the
Communication Server 1000 documentation suite, as listed in Related
information.
This NTP contains information about systems, components, and features
that are compatible with Nortel Communication Server 1000 Release 5.0
software. For more information on legacy products and releases, click the
Technical Documentation link under Support on the Nortel home page:
Table 1
Contents
"MG 1000B hardware platform" (page 17)
"Media Card MC32S" (page 18)
"Main and Branch Office running different releases" (page 18)
"Main Office and Branch Office Migration" (page 18)
MG 1000B hardware platform
The MG 1000B system has been enhanced for CS 1000 Release 5.0
Branch Office. The CP-PM Call Server and MGC replace the Small System
Controller (SSC) used in the Release 4.0 and 4.5 MG 1000B.
Two new DSP Daughterboards are included in the CS 1000 portfolio of
products. The daughterboards are available in two different sizes, a 32-port
daughterboard and a 96-port daughterboard. These daughterboards are
located on the Media Gateway Controller card to provide DSP resources
for connecting IP and TDM devices, and eliminate the need to install the
Voice Gateway Media Cards within the CS 1000E Media Gateways (MG
1000B) chassis.
Nortel Communication Server 1000
Branch Office Installation and Commissioning
NN43001-314 01.02 Standard
Release 5.0 20 June 2007
Copyright © 2007, Nortel Networks
.