Shows the, Figure 86 "signaling server – Nortel Networks NN43001-314 User Manual
Page 238
238
MG 1000B platform hardware installation
Figure 86
Signaling Server indicators and power switch
The Signaling Server LED indicators show the following:
•
Power – green LED on, power on; LED off, power off.
•
Status – red LED off, CPU running; LED on, CPU halted.
•
Drive – green LED flashing, Hard Drive or CD ROM Drive
active.
•
Link – green LED, Ethernet port active.
•
100Mbps – green LED on, Ethernet port running at 100Mbps;
LED off, Ethernet port running at 10Mbps.
When the power is turned off on a Signaling Server, the two Link
LEDs for Port 0 and Port 1 continue to flash. Depress the Power
button for approximately seven seconds to completely turn the
power off.
6
For additional operating information, refer to the Signaling Server
Product Guide on the Resource CD-ROM shipped with the Signaling
Server.
—End—
To install the Signaling Server software, see
Nortel Communication Server 1000
Branch Office Installation and Commissioning
NN43001-314
01.02
Standard
Release 5.0
20 June 2007
Copyright © 2007, Nortel Networks
.