Nortel Networks NN43001-314 - Manual (Page 302)

302 Dialing plan configuration
a. Configure the DMI in LD 86 with the DGT feature.
LD 86 Configure the Digit Manipulation Index at the main office.
Prompt Response Description
REQ NEW Add new data.
CUST xx Customer number as defined in LD 15.
FEAT DGT Digit manipulation data block
DMI 1-999 Digit Manipulation Index numbers
The maximum number of Digit Manipulation tables is defined at
the MXDM prompt in LD 86.
DEL (0)-19 Number of leading digits to be deleted, usually 0 at the main
office.
INST x … x Insert. Up to 31 leading digits can be inserted, usually none at
the main office. Default is none.
ISPN IP Special Number
(YES)
NO For off-net calls
For on-net calls
CTYP Call type to be used by the call. This call type must be
recognized by the NRS and far-end switch. This is critical for
correct CLID behavior.
If ISPN=NO, the CLID is based on this field. If ISPN=YES, the
CLID is based on the call type before digit manipulation.
SPN
LOC For off-net calls (ISPN=YES)
For on-net calls (ISPN=NO)
b. Configure the RLI in LD 86 with the RLB feature.
LD 86 Configure Route List Index.
Prompt Response Description
REQ NEW Add new data.
CUST xx Customer number as defined in LD 15
FEAT RLB Route List data block
RLI Route List Index to be accessed
0-127
0-255
0-999 CDP and BARS
NARS
FNP
ENTR 0-63
X Entry number for NARS/BARS Route List
Precede with x to remove
LTER NO Local Termination entry
Nortel Communication Server 1000
Branch Office Installation and Commissioning
NN43001-314 01.02 Standard
Release 5.0 20 June 2007
Copyright © 2007, Nortel Networks
.