Nortel Networks NN43001-314 - Manual (Page 282)

282 MG 1000B telephones
Changing the SCPW
Use Procedure 27 "Installing IP Phones through overlays" (page 279) to
change the SCPW of a telephone at any time.
Procedure 28
Changing the SCPW
Step Action
1 Dial the SCPC code followed by the current Station Control
Password.
An FFC tone is given at this point.
2 Enter the new password.
The new password must be the same length as SCPL.
3 Wait for the FFC tone and enter the new password again.
If the new password is accepted, another FFC tone is given. If the
new password is not accepted, an overflow tone is given.
—End—
Telephone Options
The IP Phone Options feature is described in IP Phones Fundamentals
(NN43001-368).
Procedure 29
Using the Telephone Options feature
Step Action
This procedure explains how to use IP Phone Options features. The IP
Phone has been configured using Branch User Config and is operating
in Normal Mode.
1 Press the Services key (the key with the Globe icon).
The Options menu is displayed (see Figure 106 "Options menu"
(page 283) ).
Nortel Communication Server 1000
Branch Office Installation and Commissioning
NN43001-314 01.02 Standard
Release 5.0 20 June 2007
Copyright © 2007, Nortel Networks
.