Nortel Networks NN43001-314 - Manual (Page 280)

280 MG 1000B telephones
The BUID, or primary DN, of an MG 1000B IP Phone should match
its primary DN at the main office, though this is not a requirement. If
different DNs are configured, the dial-in numbers change when the
Branch Office is in Local Mode.
WARNING
Do not delete the BUID/MOTN. If they are subsequently
deleted, the association between the main office and the
Branch Office will be lost, and any IP Phones which are
in, or go into, Local Mode, will remain in Local Mode.
LD 11 Provision Branch User and SCPW at the Branch Office.
Prompt Response Description
REQ: NEW CHG Add new data, or change existing data.
TYPE: a...a Terminal type.
Type. ? for a list of possible responses.
CUST xx Customer number as defined in LD 15.
BUID x...x Branch User ID.
A dialable DN to call the telephone in Normal
Mode from the Branch Office.
Enter X to delete.
MOTN Main Office Terminal Number.
l s c u Format for Large System and CS 1000E
system, where l = loop; s = shelf, c = card, and
u = unit.
c u Format for Small System, Media Gateway
1000B, where c = card and u = unit.
ZONE 0-255 Zone Number to which the IP Phone belongs.
The zone prompt applies only when the TYPE
is 2001P2, 2002P1, 2002P2, 2004P1, 2004P2,
2007, or 2050PC, 2050MC. Zone number is not
checked against LD 117.
...
SCPW xxxx Station Control Password Must equal Station
Control Password Length (SCPL) as defined
in LD 15. Not prompted if SCPL = 0. Precede
with X to delete.
Nortel Communication Server 1000
Branch Office Installation and Commissioning
NN43001-314 01.02 Standard
Release 5.0 20 June 2007
Copyright © 2007, Nortel Networks
.