Ringdale ISDN - Manual (Page 100)

100
CONFIGURING WITH A LOCAL CONSOLE
Figure 9
To use one of these commands:
Type the word for the command from the left column of the above list
or the abbreviation given in brackets from the middle column. When
you have completed typing the command, press the Enter key.
To configure your router, you should use the SETUP
command, which gives you the SETUP menu.
To select this command, do the following:
Type SETUP or SU from the menu above and press the
Enter key.
The SETUP menu is shown in figure 10.
O v e r L A N
Operating System 1.47
[unit designation]: ?
Command Options
------------------------------------------------------------------
CALL x
[Cx] - Call ISDN Channel x.
CLOSE [CL] - Disconnect ISDN Channel.
RESET [RE] - Restart the OverLAN Unit.
SETUP [SU] - Enter OverLAN Setup Menu.
SYSOP [SY] - Enter OverLAN System Options Menu.
HELP [?] - Displays this message.
Router Status Commands:
STATUS [ST] - System Status.
STATS [SS] - Router Statistics.
NRIP [NR] - Novell Routing Info.
SAP [SP] - Novell SAP Info.
RIP [RP] - IP Routing Info.
ARP [AR] - ARP cache.
FILTER [FI] - Current MAC filters.
[unit designation]: