Ringdale ISDN - Manual (Page 30)

30
CONFIGURING YOUR ROUTER
Network: This is the Novell network.
Router: This is the Ethernet, or MAC, address of the selected
router being used to reach the Novell Network.
Hops: This is the number of routers or similar devices thru which
the network can be reached.
Time: This is the internal Novell metric time it takes to get a
response from the selected network.
SAP Table
SAP appears under the Table Tab for the properties for a router.
The SAP table shows the servers and routers (known to the
selected router) that use IPX SAPs. This table is used when
spoofing occurs and will determine what servers can be seen by the
selected router.