Ringdale ISDN - Manual (Page 5)

5
Getting Started
The following items are included in the OverLAN router package:
• The Ethernet/ISDN router,
• An RJ11 - DB25 communications cable,
• An unshielded RJ45 ISDN cable,
• The power cord,
• A 10BASE-2 T-connector,
• 3.5 inch disk(s) for OverLAN Commander,
• This manual and a warranty return card.
Before starting to setup the router, you need the following:
• A fully operating Ethernet using TCP/IP and/or Novell
Netware,
• An NT-1,
• A shielded RJ45 Ethernet cable,
• An ISDN BRI line -- you will need to know the ISDN
phone number(s) and SPID (only required in the USA)
number(s),
• A 9DB - DB25 pin adaptor if you have a computer with a
9-pin serial port,
• A computer running Microsoft Windows (version 3.11 or
greater), or optionally an ASCII terminal or a computer
running terminal software.
No additional tools are needed to install your router.