Ringdale ISDN - Manual (Page 32)

32
CONFIGURING YOUR ROUTER
The RIP table shows the IP networks known to the selected router.
These networks determine how IP packets will be routed.
Location: This is the location on the network (static, local/
dynamic, or remote) of the network.
Network: This is the IP address of the network.
Subnet: This is the subnet mask of the network..
Router: This is the IP address of the router to reach this network.
RIP Information: This part of the RIP table shows decoded
information, if possible. To decode a RIP Table entry, click once
on the Table entry you want decoded. The decoded information
will then appear for the selected entry.
ARP Table
ARP appears under the Table Tab for the properties for a router.