Ringdale ISDN - Manual (Page 12)

12
Step 3:
Connect one end of another RJ45 cable to the U-interface
on the NT-1 -- see figure 7.
Figure 7
Step 4:
Connect the other end of the cable to the ISDN phone jack
on the wall -- see figure 8.
This completes Task 4.
INSTALLING the OverLAN ROUTER
RJ45 cable
NT-1
Connect to
U-interface
of NT-1
ISDN phone jack
Rrefer to the instructions
included with your NT-1,
an ISDN unit you purchase
seperately.