Ringdale ISDN - Manual (Page 161)

161
To view status information about the router and about current
ISDN calls, use the STATUS command. Type either
STATUS or ST and press Enter when you are ready.
To view statistics about errors or the rate of data transfer for
transmitted or received data, use the STATS command. Type
either STATS or SS and press Enter when you are ready.
To view Novell routing information, use the NRIP
command. Type either NRIP or NR and press Enter when
you are ready.
To view Novell SAP information, use the SAP command.
Type either SAP or SP and press Enter when you are ready.
To view IP routing information, use the RIP command.
Type either RIP or RP and press Enter when you are ready.
To view ARP cache information, use the ARP command.
Type either ARP or AR and press Enter when you are ready.
To view information on current MAC filters, use the
FILTER command. Type either FILTER or FI and press
Enter when you are ready.
For additional general information about routing options, you
may want to refer to explanations given in the sections on
configuring the router from OverLAN Commander. The
helpfiles for OverLAN Commander also contain general
information that may be useful.
This completes the section Operating the Router from a
Local Console.
This also completes the Operating the OverLAN Router
section of the manual.
OPERATING YOUR ROUTER