Ringdale ISDN - Manual (Page 108)

108
Task 3: Configuring the ISDN Manager
From the Setup Menu,
Press 2
to configure the ISDN Manager.
The prompt
Telco. Type : [NI-1]
will appear at the bottom of the video display.
T he default of
Telco. Type is ETSI. Pressing the spacebar
switches among ETSI, NI-1, and ETSI Variant.
Choices:
• ETSI is the type of ISDN phone service used in locations
other than the USA and Germany.
• NI-1 is the type of ISDN phone service used in the USA.
• ETSI Variant is the type of ISDN phone service used in
Germany.
If you are unsure of the type of ISDN phone service, use the
default setting for this option.
If this option is set incorrectly, the router may not be able to
communicate with the phone switch and may not be able to
make or receive calls.
Press the Enter key when you are ready to continue.
CONFIGURING WITH A LOCAL CONSOLE