Ringdale ISDN - Manual (Page 154)

154
There is another Reset button located on the back of the
router that performs the same function as the Reset button on
the front of the router.
Operating the Router from OverLAN Commander
for Windows 95/NT
For an introduction to OverLAN Commander, see the
Configuring Your Router section of the manual.
In OverLAN Commander, you can select from menu items
and toolbar buttons (after router properties are accessed).
In router properties, there are two dialog boxes for
monitoring the operation of the OverLAN router, the Status
and Statistics dialog boxes.
The Status dialog box, shown on the next page, provides
version and network location information about the router,
the current status of ISDN calls, and status messages from
the router about errors or other operational issues.
OPERATING YOUR ROUTER
Buttons Explanation
Aux + Reset
Reboot router using firmware from the
permanent EPROM (factory code).
Aux + ENTER key (on
keyboard of local console)
Activates autobaud detection (router
automatically detects the baud rate of
the local console and adjusts itself).
Close Channel + Reset
Clears setup and reverts to factory
default settings for current firmware.