Ringdale ISDN - Manual (Page 118)

118
The prompt
Local B1 SPID number :
will appear.
A SPID number may be needed if you set Telco. Type to
NI-1. You should consult your Network Administrator to
find out if a SPID number is required.
Choices:
• Type your router’s ISDN SPID number (provided by
the phone company).
If you acquired two ISDN SPID numbers for your
router, type the one corresponding to channel B1 here.
• Type nothing if SPIDs are not required in your area.
Press the Enter key when you are ready to continue.
CONFIGURING WITH A LOCAL CONSOLE