Ringdale ISDN - Manual (Page 133)

133
If WAN IP Assignment is set to Fixed then you must enter
the WAN IP Address at the prompt WAN IP Address.
Then the prompt
Translate Mode :
will appear.
1 to 1 Static allows one computer on the local network to
have permanent access to the router (for the Internet, for
example).
1 to 1 Dynamic allows one computer at a time on the local
network has access to the router (for the Internet, for
example).
1 to Many allows many users on the local network
simultaneous access to the router (for the Internet, for
example) using a single dynamic IP address.
NOTE: If 1 to 1 Dynamic is selected, the router must be
locked by the user before Internet access is permitted and
released after closing the connection. Select lock or release
from the toolbar, the Router menu, or from a pop-up menu
accessed by right-clicking on the router name in the list of
routers.
If 1 to 1 Static IP Address Translation is selected, then you
must type the IP address of the computer or device getting
access to the router. Reset of the router is required when
enabling this option.
Press the Enter key when you are ready to continue.
CONFIGURING WITH A LOCAL CONSOLE