Ricoh AP2610N User Manual
Page 144
Paper and Other Media
42
3
Loading custom sized paper in the
Bypass Tray
Important
❒ The settings of custom sized paper
that take effect are not the settings
made on the control panel but the
settings made in the printer driver.
There is no need to change the set-
tings on the control panel. Howev-
er, when using a printer driver
other than RPCS, you will need to
change the settings on the control
panel.
❒ Applications that do not allow a
custom paper size to be set cannot
print on custom sized paper.
Note
❒ If you print on A3 or longer sheets,
prints may become blurred.
AAAA
Press
{{{{Menu}}}}.
"Menu" appears on the panel dis-
play.
BBBB
Press
{{{{T
T
T
T}}}} or {{{{U
U
U
U}}}} to display "Pa-
per Input" menu.
CCCC
Press
{{{{Enter #}}}}.
The following message appears on
the panel display.
DDDD
Press
{{{{T
T
T
T}}}} or {{{{U
U
U
U}}}} to display "Cus-
tom Size".
EEEE
Press
{{{{Enter #}}}}.
The following message appears on
the panel display.
FFFF
Press
{{{{T
T
T
T}}}} or {{{{U
U
U
U}}}} to display the
length in the feed direction, and
then press
{{{{Enter #}}}}.
The screen to enter the size along
the length appears.
GGGG
Press
{{{{T
T
T
T}}}} or {{{{U
U
U
U}}}} to display the
size along the length of the feed
direction, and then press
{{{{Enter
#
}}}}.
The screen returns to step
D
in a
few seconds.
HHHH
Press
{{{{On Line}}}}.
"Ready" appears on the panel dis-
play.
Menu
Paper Input
Enter
Form Feed
Job Reset
On Line
Escape
Menu
Power
Error
Data In
Paper Input:
Bypass Size
Bypass Size:
Custom Size
Custom Size:
Horiz. 11.69 "
Custom Size:
Vert. 8.27 "
Ready