Ricoh AP2610N - Manual (Page 234)

Making Printer Settings with the Control Panel
132
6
Network Setup
❖ ❖ ❖ ❖ Network Boot
You can set how the Network Interface Board acquires
TCP/IP settings.
Note
❒ Default: None
❖ ❖ ❖ ❖ Frame Type (NW)
You can set the Frame Type for NetWare.
Note
❒ Default: Auto
❖ ❖ ❖ ❖ Active Protocol
You can set the active protocol.
TCP/IP, NetWare, NetBEUI, AppleTalk
Note
❒ Default: All Active
❖ ❖ ❖ ❖ Ethernet
You can select the speed of the network to which the printer is
connected.
Auto, 10 Mbps, 100Mbps
Note
❒ Default: Auto
❖ ❖ ❖ ❖ LAN Type
You can select Ethernet or IEEE 802.11b for the LAN type.
Note
❒ Default: Ethernet
❒ Appears only when the optional 802.11b Interface Unit is
installed in the Network standard model.
Reference
For more information about Network Setup, see "Config-
uring the Printer for the Network" in the Setup Guide.
Menu Description