Ricoh AP2610N - Manual (Page 261)

Specifications
159
7
❖ ❖ ❖ ❖ Warm-up Time:
Less than 19 seconds (23
°C, 73F)
❖ ❖ ❖ ❖ Paper Capacity:
*1 Paper weight: 60 – 105 g/m 2 (16 – 28 lb. bond)
*2 You can load up to 10 envelopes (55 – 157 g/m 2 , 14 – 42 lb. bond) at the same time.
*3 To use the Envelope Feeder Unit, the optional Paper Feed Unit is required. The
paper tray of the feed unit can be replaced with the Envelope Feeder Unit.
*4 For more information about envelopes, see p.33 “Types of Paper and Other Me-
dia”.
❖ ❖ ❖ ❖ Paper Output Capacity:
250 sheets (80 g/m 2 , 20 lb. bond)
❖ ❖ ❖ ❖ Memory:
Standard 32MB, up to 96MB (with the optional Memory Unit)
❖ ❖ ❖ ❖ Network (Basic model printer requires the optional Network Interface Board):
Topology: Ethernet (10BaseT/100BaseTX)
Protocol: TCP/IP, NetBEUI, IPX/SPX, AppleTalk
❖ ❖ ❖ ❖ Optional Equipment:
Common for the Basic model printer and the Network standard model
printer
• Paper Feed Unit Type 2600
• Envelope Feeder Type 2600
• 1-bin Shift Sort Tray Type 2600
• CS380 (Mailbox)
• AD410 (Duplex Unit)
• Memory Unit TypeB 64MB
• Hard Disk Drive Type 2600
• 1394 Interface Unit Type 4510
• 802.11b Interface Unit Type A
Unique for the Basic model printer
• Network Interface Board Type 2610
Standard paper tray 250 sheets *1 (80g/m 2 , 20 lb.bond)
Bypass Tray *2 100 sheets *1 (80g/m 2 , 20 lb.bond)
Optional Paper Feed Unit × 2
500 sheets
× 2 *1 (80g/m 2 , 20 lb.bond)
Optional Envelope Feeder *3 60 envelopes *4