Ricoh AP2610N - Manual (Page 346)

NetWare Configuration
56
5
LLLL
Create a print queue as follows:
Note
❒ If you use a currently defined print queue, go to step M .
A From the [Available Options] menu, select [Print Queue Information], and then
press the
{{{{ENTER}}}} key.
B Press the {{{{INSERT}}}} key, and then type a print queue name.
C Press the {{{{ESC}}}} key to return to the [Available Options] menu.
MMMM
Create a printer as follows:
A From the [Available Options] menu, select [Print Server Information] , and then
press the
{{{{ENTER}}}} key.
B To create a new print server, press the {{{{INSERT}}}} key, and then type a
print server name.
If you use a currently defined print server, select one of the print servers
shown in the [Print Server] list.
Important
❒ Use the same name as that specified in the NIB Setup Tool. (Step H).
C From the [Print Server Information] menu, select [Print Server Configuration].
D From the [Print Server Configuration] menu, select [Printer Configuration].
E Select the printer which is indicated as “Not Installed”.
F If you want to change the name of the printer, type a new name.
A name “Printer x” is assigned to the printer. “x” stands for the number of
the selected printer.
G For type, select [Remote Other/Unknown].
The IRQ, Buffer size, Starting form, and Queue service mode are automat-
ically configured.
H Press the {{{{ESC}}}} key, and then click [Yes] in the confirmation dialog box.
I Press the {{{{ESC}}}} key to return to the [Print Server Configuration] menu.
NNNN
Assign print queues to the created printer as follows:
A From the [Print Server Configuration] menu, select [Queues Serviced By Printer].
B Select the printer created in step MMMM.
C Press the {{{{INSERT}}}} key to select a queue serviced by the printer.
Note
❒ You can select more than one queue at a time.
D Follow the instructions on the screen to make other necessary settings.
When you have finished the previous steps, make sure that the queues are
assigned.