Ricoh AP2610N User Manual
Page 330
Advertising
Windows NT 4.0 Configuration
40
4
DDDD
Type “0” as the Lana Number.
Note
❒ If the other protocol's Lana Number is configured with “0”, you must
change the Lana Number a number other than “0”.
EEEE
Click [OK].
FFFF
Click [Close], and then close the [Network] dialog box.
GGGG
After checking the message to restart, click [Yes].
Note
❒ After you change the Lana Number, you must restart the computer.
Advertising