Ricoh AP2610N User Manual

Page 264

Advertising
background image

Appendix

162

7

Memory Unit TypeB 64MB

Module Type:

SO-DIMM (Small Outline Dual-in-line Memory Module)

Memory Type:

SDRAM (Synchronous Dynamic RAM)

Number of Pins:

144 pins

Network Interface Board Type 2610

Topology:

Ethernet (10BaseT/100BaseTX)

Protocols:

TCP/IP, NetBEUI, IPX/SPX, AppleTalk

Interface Connector:

RJ45

Required Cable:

STP (Shielded Twisted-Pair) cable
Category / Type5 or better

1394 Interface Unit Type 4510

Transmission Spec.:

IEEE 1394

Device Class:

SCSI print, IP over 1394

Interface Connector:

IEEE 1394 (6 pins

× 2)

Required cable:

1394 interface cable (6 pins x 4 pins, 6 pins x 6 pins)

Important

❒ You cannot plug devices together to create loops.
❒ Do not use a cable more than 4.5 meters (14.8 feet) long.

Connectable number of device in a bus:

Maximum 63

Advertising