Ricoh AP2610N - Manual (Page 348)

NetWare Configuration
58
5
B In the [File Server Name] box, type the name of the file server in which a
print server is to be created.
Clicking [Browse], you can select a file server among those listed in the
[Browse]
dialog box.
C In the [Print Server Operation Mode] group, click [As Remote Printer].
D In the [Remote Printer No.] box, type the printer number.
Important
❒ Use the same printer number as that to be created in the printer server.
E Click [OK] to close the property sheet.
F After the confirmation dialog box appears, click [OK].
JJJJ
On the [NIB] menu, click [Exit] to exit the NIB Setup Tool.
KKKK
Type “PCONSOLE” from the command prompt.
F:> PCONSOLE
LLLL
Create a print queue as follows:
Note
❒ If you use a currently defined print queue, go to step M .
A From the [Available Options] menu, select [Print Queue Information], and then
press the
{{{{ENTER}}}} key.
B Press the {{{{INSERT}}}} key, and then type a print queue name.
C Press the {{{{ESC}}}} key to return to the [Available Options] menu.
MMMM
Create a printer as follows.
A From the [Available Options] menu, select [Print Server Information] , and then
press the
{{{{ENTER}}}} key.
B To create a new print server, press the {{{{INSERT}}}} key, and then type a
print server name.
If you use a currently defined print server, select one of the print servers
shown in the [Print Server] list.
Important
❒ Use the same name as that specified in the NIB Setup Tool. (Step H).
C From the [Print Server Information] menu, select [Print Server Configuration].
D From the [Print Server Configuration] menu, select [Printer Configuration].
E Select the printer which is indicated as “Not Installed”.
Important
❒ Use the same number as that specified as Remote Printer No. using the
NIB Setup Tool. (Step
I-D).