Omega Vehicle Security OMP-MODL - Manual (Page 100)

5... H YPER C OMM ™ C OMMUNICATIONS
U SING THE OMP-MODL 5-13
If a different Program Net is to be transferred, open the desired
Program Net from within HyperNet, then return to the HyperComm
window and drag the icon to the logger.
Refer to Chapter 6 for details on the transfer of Program Net to and
from the PCMCIA card.
NOTE: If the target logger memory contains collected
data, the User will be prompted to download or clear the
data prior to reprogramming. Upon upload of the new
Program Net, data in the logger memory will be lost.
NOTE: During the upload of a Program Net to the
logger, several integrity tests are performed. One of the
tests checks the size of the Program Net to insure that it
will fit into the available logger memory. In the event that
the Program Net is too large, reduce the number of icons
and retry. Refer to the README file supplied with the
HyperWare for an approximate maximum number of
icons that can be included in a Program Net for that
version of software.
Data Download
To transfer data from the logger memory to a file on the PC disk,
click and drag the Memory icon overlaying the logger to the PC and
release it. After a prompt dialog, the data will be downloaded. Upon
completion of the serial data transfer, a filename will be requested
by a pop-up dialog.
Figure 5...
-9:
Memory
icon