Omega Vehicle Security OMP-MODL - Manual (Page 241)

11.. . A PPENDIX A: M ASTER I CON R EFERENCE
U SING THE OMP-MODL 11-79
Count Rising / Falling Edges: The Up Counter increments its accumulated count
when its input changes state. The User can use this option to specify
whether Rising (False to True) or Falling (True to False) transitions
(edges)are to be counted.
Output Count upon disable: Check this box to force an output of the accumulated
Count at any time that the icon is disabled. If this box is not checked, upon
receipt of a disable signal, the Counting function will be momentarily
suspended until the icon is re-enabled and no in-process value will be
output.
For example, if a Count is to be output when a one hour Update Pulse has
been received but only 20 minutes have gone by and the icon is disabled,
the 20 minute sample Count total will be output and the counting function
will be suspended until re-enabled. Upon re-enable,counting will continue
and after 40 more minutes, the hourly Count Total will be output (unless
the following check box is checked)
Count Rising / Falling Edges: The Timed Counter increments its accumulated
count when its input changes state. The User can use this option to
specify whether Rising (False to True) or Falling (True to False) transitions
(edges)are to be counted.
Units: Provides a text box for User entry of a units label that will be shown at the
output from this icon. Conversion to other units can be performed within a
Program Net by adding a Math Icon onto this icon’s output.
Output Name: Specify the label for the Output. This name will show directly
under the Output terminal within the Program Net.