Omega Vehicle Security OMP-MODL - Manual (Page 201)

11.. . A PPENDIX A: M ASTER I CON R EFERENCE
U SING THE OMP-MODL 11-39
3. The code number 9999 will be sent to the pager
4. The OMP-MODL modem will disconnect.
The commas are entered to insert a delay between the dialing of the pager
and the sending of the code. The delay time should be determined by the
User to meet the subscribed pager system timing requirements. This delay
can be determined empirically by calling the pager with a telephone and
manually timing the delay between the last number dial and the tone
indicating when a pager code should be entered. To allow for variations in
this delay time, a few extra seconds (one or two commas) can be added to
insure that the tone is received before the pager code is sent.
NOTE: The OMP-MODL does not detect a busy line or pager tone, it
merely executes the sequence of numbers and commas defined in this text
box. The Pager call-out function and associated timing should be tested
prior to field application.
Number of times to repeat page: If a number other than 0 is entered in this box,
the Pager icon will will repeat the dialing sequence the specified number of
times.
Number of seconds between retries: Enter the time to wait(in seconds)
before a repeat call is placed.
APPLICATION CONSIDERATIONS:
Multiple Pager icons can be used in a Program Net, each connected to a different status
or warning function. Different pager phone numbers and/or codes can then be assigned
to indicate different status or warning conditons.