Omega Vehicle Security OMP-MODL - Manual (Page 193)

11.. . A PPENDIX A: M ASTER I CON R EFERENCE
U SING THE OMP-MODL 11-31
DIGITAL O UTPUT I CON (MLIM-8)
FUNCTION:
Eight channels of Digital output or Event input are all provided with the MLIM-8. With
the MLIM-8 installed in a OMP-MODL, these respective function icons become available
for use in Program Nets. (Click on the CHANGE button within the Event dialog to switch
the channel’s icon function to a Digital Output).
The Digital Output icons provide software access to these digital outputs.
This channel/icon can be changed from a Digital Output to an Event Input channel by
clicking on the CHANGE button.
INPUTS:
Data/Logic Signal: Logic type. True input turns hardware output ON. False input
turns output OFF. Optionally, use the Latch icon in front of the Digital
Output icon to latch the Output True upon receipt of a momentary True
input.
Update Clock: None
Enable: Processing of icon is allowed when Enable pin is unconnected or
connected and Enable signal is TRUE.
OUTPUTS:
Output Signal: Hardware output only. No output terminal shown on icon for
Program Net connections.
ICON CONFIGURATION DIALOG BOX:
CONFIGURATION OPTIONS:
Icon Name: Specify the name for the channel. This name will show directly under the
icon within the Program Net. If no name is User provided, the Backplane
Port (1 to 6) and Channel (A to D) where the actual Interface Module
channel is installed will be used for the name.
Input Name: In this box, HyperNet displays the Output Name of the icon connected to
this icon’s Input. The Output Name can be changed in the other icon’s
dialog.
Use this channel for Input: Select CHANGE to switch this icon into an Event type
Input icon.